David Reina Designs

Spec Sheet

  2
LB.
STAINLESS STEEL		 7
LB.
STAINLESS STEEL		 10
LB.
STAINLESS STEEL
CAPACITY Up to 2 pounds
of dry fiber/pulp with 14 gallons of water

Up to 7 pounds of dry fiber/pulp with 45 gallons of
water

 Up to 10 pounds
of dry fiber/pulp with 75 gallons of water
BEATING
ADJUSTMENT		 By turning the handwheel,
the beater roll is precisely raised and lowered over a fixed bedplate.		 same same
ROLL

CONSTRUCTION		 Roll has 24
stainless steel blades held in a bronze spool. Blades are replaceable.
Roll diameter: 8′; roll width: 8 3/8′; Blade face width: .187′.		 Roll has
42 stainless steel blades held in a bronze spool. Blades are replaceable.
Roll diameter: 15 1/2′; roll width: 12′; Blade face width: .187′.		 Roll has 42
stainless steel blades held in a bronze spool. Blades are replaceable.
Roll diameter: 15 1/2′; roll width: 14′; Blade face width: .187′.
BEDPLATE Stainless steel Stainless steel Stainless steel
TUB
& COVER		 Stainless steel tub with
O-shaped midfeather; stainless steel hinged removable roll cover; clear
plastic splash/safety guard.		 45 gallon stainless steel
tub with O-shaped midfeather; stainless steel hinged removable roll
cover; clear plastic splash/safety guard. Sloped floor from backfall
to bedplate.		 Same as 7 lb machine,
but with 75 gallon tub size.
ROLL
SHAFT
SEALS		 Sliding plastic seals
are a special feature whose function is to contain water and pulp in
the tub where the roll shaft passes through the tub.		 Beater has repackable
seal units which
allow the seals to be renewed without
disassembly of machine		 Same as 7 lb machine
MOTOR 1 horsepower,
capacitor start; enclosed drip proof case; continuous duty rating; 110
or 220 volt, 50 / 60 HZ, Overload protection		 5 horsepower,
single or 3 phase
220 volt, 50 / 60 HZ, Magnetic

Starter with thermal protection included

 7 1/2 horsepower,
single or 3 phase 220 volt, 50 / 60 HZ, Magnetic starter with thermal
protection included
BEARINGS Heavy duty rated ball
bearings		 same same
STAND Stainless steel Aluminum Aluminum
MACHINE
SIZE		 Length: 41.5′ Width: 33′
Height: 43′		 Length: 57′ Width: 44′
Height: 52′		 Length; 62′ Width:53′
Height:52′
OPTIONS 1. Digital roll height
indicator
2. Locking casters		 Digital roll height indicator
is included		 Digital roll height indicator
is included